Modul:Wd/doc

A Wikipédiából, a szabad enciklopédiából
< Modul:Wd
Ugrás a navigációhoz Ugrás a kereséshez

Ez a Modul:Wd dokumentációs lapja

This modul is intended to fetch data from Wikidata with or without a link to the connected Wikipedia article and with many other features.

Usage[szerkesztés]

Sablon:Tnull

Commands[szerkesztés]

The commands (Sablon:Background color, Sablon:Background color, ...) determine what kind of values are returned. One call can only contain commands from a single classSablon:Module other.

Claim class[szerkesztés]

The claim class commands can be combined, meaning that multiple commands of different types from this class can be given at one time.

Combine multiple commands into one call to this modul, instead of making multiple calls to this modul with one command each, to be sure that all the returned pieces of information belong to each other.

Type Command Returns Basic usage Description
I property first match[lower-alpha 1] Sablon:Tnull Returns the requested property – or list of properties – from the current item-entity or from a given entity.
properties all matches Sablon:Tnull
II qualifier first match[lower-alpha 1] Sablon:Tnull Returns the requested qualifier – or list of qualifiers – from the given property of the current item-entity or of a given entity.

Unlike the other claim class commands, this command can be given multiple times to retrieve different qualifiers in one call.

qualifiers all matches Sablon:Tnull
III reference first match[lower-alpha 1] Sablon:Tnull Returns a reference – or list of references – from the given property of the current item-entity or of a given entity.[lower-alpha 2]
references all matches Sablon:Tnull
  1. a b c Returns only a single value instead of multiple (if multiple claims or statements match). The returned value is the first match found from the best-ranked claims.
  2. Only references that are valid according to the Wikidata guideline on sources are returned (i.e. those that have at least a property Sablon:Wpl or Sablon:Wpl).

General class[szerkesztés]

The general class commands cannot be combined.

Type Command Returns Basic usage Description
I label Sablon:Tnull Returns the label of the current item-entity or of a given entity if present.
II title Sablon:Tnull Returns the title of the page linked to the current item-entity or to a given item-entity if such page exists.
III alias first match[lower-alpha 1] Sablon:Tnull Returns an alias – or list of aliases – of the current item-entity or of a given entity if present.
aliases all matches Sablon:Tnull
IV badge first match[lower-alpha 1] Sablon:Tnull Returns a badge – or list of badges – for the page linked to the current item-entity or to a given item-entity if such page exists.
badges all matches Sablon:Tnull
  1. a b Returns only a single value instead of multiple (if multiple values are present).

Flags[szerkesztés]

The following (optional) flags are available which can be used to alter this modul's behaviour. They must be given after the (first) Sablon:Background color and before the other Sablon:Background color. For convenience, empty flags (i.e. ||) are allowed and will simply be ignored.

Command flags[szerkesztés]

These flags (Sablon:Background color, Sablon:Background color, ...) apply to the command that precedes them directly.

Flag Description
linked Creates a link to the Wikipedia article that is connected to the property or qualifier if it exists. Also links units of measurement that may be appended to values.

If this parameter is omitted, then the plain property or qualifier value will be returned.

short [EXPENSIVE] Returns the Sablon:Wpl of any entity returned if they have one attached. If that is not the case, then the default behaviour of returning the entity's label will occur.
raw Returns the raw value if applicable.

If this flag is used with item or property datatypes, then this will return the Q-identifier or P-identifier.

For quantity datatypes, this flag will strip off any units of measurement, unless the unit flag is also given in which case the raw unit of measurement (its Q-identifier) will be returned.

If this flag is used with time datatypes, then the returned date will be in the format of yyyy-mm-dd (e.g. 1731-02-11), or yyyy-mm, or yyyy depending on the date's precision. Dates in the Julian calendar stored with a precision of days through millenniums will have /Julian attached to the output (e.g. 1731-02-11/Julian, which may be split off using the [[mw:Help:Extension:ParserFunctions#.23titleparts|Sablon:Tlf template function]]).

If it is used with globe coordinate datatypes, then it replaces the various symbols with forward slashes in the returned value (e.g. 52/5/3/N/4/19/3/E, which may be split into parts using the [[mw:Help:Extension:ParserFunctions#.23titleparts|Sablon:Tlf template function]]).

multilanguage Returns monolingual text values in any available language, not just the current wiki's language.
unit Returns only the unit of measurement for quantity datatypes.

Configuration flags[szerkesztés]

These flags (Sablon:Background color) are general configuration flags and can be given anywhere after the first command (but before the other arguments).

Flag Command class Description
Combination of: preferred claim Sets a rank constraint for the selected claim(s).

The first three set the ranks for which claim(s) will be selected. They can optionally be followed by a + or a -, e.g. normal+ or preferred-, where the first selects claims with a 'normal' rank or higher and the second selects claims with a 'preferred' rank or lower. To get claims of all ranks, use preferred- or deprecated+.

If the best flag is given additionally, then only the claims that have the highest rank amongst the selected claims will be returned.

The default is normal+|best (so by default claims with a 'deprecated' rank are never returned).

Output is always sorted from highest rank to lowest (regardless of any of these flags being set).

normal
deprecated
best
Combination of: future claim Sets a time constraint for the selected claim(s). Uses the claims' qualifiers of Sablon:Wpl and Sablon:Wpl to determine if the claim is valid for the selected time period(s).

The default is future|current|former (so by default claims that are valid for any time period are returned).

current
former
mdy claim Returns date values in month-day-year order instead of day-month-year order.
single claim Returns only a single claim instead of multiple (if multiple claims match). Has no effect if the property/properties command is given, in which case this flag would be redundant.
sourced claim Only returns claims that have at least one valid reference.
One of: edit claim, general Adds a clickable icon after the output that may be used by readers to edit the returned claim on Wikidata.

If edit@end is used, then the icon will be placed at the end of the line for neat alignment in infoboxes.

edit@end

Arguments[szerkesztés]

The arguments determine the sources from which all the returned values are fetched.

Positional arguments[szerkesztés]

The following table shows the available positional arguments (Sablon:Background color) in their fixed order. For each command, the applicable set of arguments is marked. If multiple commands are given, then the applicable set is the union of the individual sets. For instance, if the commands properties and qualifiers have been given, then at least both the arguments property_id and qualifier_id should be given as well.

More than one qualifier/qualifiers command can be given. The order in which these commands with their flags are given matches the order in which the respective qualifier_id arguments are given.

(required) (optional) (optional) (required) (optional) (required) (required)
{{wd commands flags entity_id property_id raw_value qualifier_id qualifier_id }}
label, title,
alias/aliases,
badge/badges
property/properties
reference/references
qualifier/qualifiers
qualifier/qualifiers (optional 2nd, 3rd, etc.)

Below follows a description of all positional arguments.

Argument Description
entity_id

(optional)

[EXPENSIVE] Q-identifier of the item-entity to be accessed (e.g. Q55), or P-identifier (or an available alias) of the property-entity to be accessed preceded by the Property: prefix (e.g. Property:P38).

In case of the general class commands, the Property: prefix may be omitted for P-identifiers (e.g. P38).

If this parameter is omitted, then the item-entity connected to the current page will be used (except when eid= is given, see below). If this parameter is given, but empty (i.e. ||), then due to its position it will be interpreted as an empty flag and thus be ignored, giving the same result as if it were omitted. See also the eid= named argument below that can be used to give an entity-ID too, but without the item-entity connected to the current page being used as a result in this specific case.

property_id P-identifier (or an available alias) of the property within the entity to be accessed, without the Property: prefix (e.g. P35).
raw_value

(optional)

Either the Q-identifier equal to the property value (e.g. Q29574) or a literal value (i.e. string or quantity etc., no entity label) equal to the raw property value of the particular claim to be accessed.

Dates as literal values must be formatted yyyy-mm-dd (e.g. 1731-02-11) for dates with a precision of days, yyyy-mm (e.g. 1731-02) for dates with a precision of months, and yyyy (e.g. 1731) for dates of lesser precision. Dates BCE require a minus sign in front of the year (e.g. -2950-01-31). Dates stored in the Julian calendar must have /Julian attached to the end (e.g. 1731-02-11/Julian). Decades like the 2010s must be given as 2010 (but the 2010s BCE as -2019), centuries like the 20th century as 1901 (but the 20th century BCE as -2000), and millenniums like the 3rd millennium as 2001 (but the 3rd millennium BCE as -3000).

Globe coordinates as literal values must be formatted with forward slashes (i.e. /) between the parts and no symbols (e.g. 52/5/3/N/4/19/3/E) without any spaces or leading zeros.

The special type 'no value' can be given by entering the empty string (i.e. ||) and the special type 'unknown value' can be given by entering a single underscore (i.e. |_|). To get a literal underscore, escape it by placing a backslash \ directly in front of it (i.e. \_); the same holds for a literal backslash (i.e. \\).

To get a literal vertical bar |, use {{!}} or &#124;.

If this parameter is omitted, then all claims (matching any other constraints) within the property will be accessed.

qualifier_id P-identifier (or an available alias) of the qualifier within the entity to be accessed, without the Property: prefix (e.g. P580).

Named arguments[szerkesztés]

Below follows a description of all named arguments, which are name-value pairs (i.e. |name=value). These are all optional and can be given anywhere Sablon:Module other.

Argument Description
eid= [EXPENSIVE] This argument offers the same functionality as the positional argument entity_id (e.g. |eid=Q55), with one difference: if the argument is given but its value is left empty (i.e. |eid=), then no entity is accessed at all instead of the item-entity connected to the current page. This is useful in some cases where a variable entity-ID is expected, but where the item-entity connected to the current page should not be accessed as the default.

Also, the Property: prefix may be omitted for P-identifiers (e.g. |eid=P38) for all commands.

This argument only has effect if the positional argument entity_id is omitted.

<qualifier>= The <qualifier> is a placeholder for a set of arguments that determine which claims should be accessed based on qualifier value, analogous to the pair of positional arguments property_id and raw_value that determine access based on property value.

As such, <qualifier> is any qualifier's P-identifier (or an available alias) without the Property: prefix (e.g. P518). Its value is either the Q-identifier equal to one of the qualifier values (e.g. Q27561) or a literal value (i.e. string or quantity etc., no entity label) equal to one of the raw qualifier values of the particular claim to be accessed. The value format is the same as for the positional argument raw_value. The special type 'no value' given by the empty string also matches the total absence within the claim of the particular qualifier.

Example: |P518=Q27561

Multiple arguments of this type can be given to match multiple qualifier values simultaneously for each claim.

Property aliases[szerkesztés]

Property aliases are other names for P-identifiers that can be used instead. The following property aliases (which are case-sensitive) are currently available:

Alias translates
to
P-identifier
coord P625
author P50
publisher P123
importedFrom P143
statedIn P248
pages P304
language P407
publicationDate P577
startTime P580
endTime P582
chapter P792
retrieved P813
referenceURL P854
sectionVerseOrParagraph P958
archiveURL P1065
title P1476
formatterURL P1630
quote P1683
shortName P1813
archiveDate P2960
column P3903

Advanced usage[szerkesztés]

The layout of the output from (a combination of) commands that have both a singular and a plural form (e.g. property/properties) can be customized by using a number of named flags, which are name-value pairs (i.e. |flag=value), that can be given anywhere Sablon:Module other. The table below shows the available named flags.

To insert a space at the beginning or end of a value, use an underscore _. To get a literal underscore, escape it by placing a backslash \ directly in front of it (i.e. \_); the same holds for a literal backslash (i.e. \\). To get a literal vertical bar |, use {{!}} or &#124;.

Named flag Default value Default condition Description
format= %p[%s][%r] if the property/properties command was given and the qualifier/qualifiers command was not given The format of a single claim. The available parameters are as follows.
Parameter Description
%p The claim's property value applied by the property/properties command.
%q1, %q2, %q3, ... The claim's qualifier value or list of qualifier values applied by the corresponding qualifier/qualifiers command.
%q The collection of the qualifier values applied by each qualifier/qualifiers command (i.e. %q1 + %q2 + %q3 + ...). If only one qualifier/qualifiers command was given, then this parameter is equivalent to %q1.
%r The claim's reference value or list of reference values applied by the reference/references command.
%a The entity's alias applied by the alias/aliases command.
%b The entity's page badge applied by the badge/badges command.
%s The movable separator placeholder. This is a special parameter that is not applied by a command, but instead is filled automatically between each pair of claims (if a list of claims is returned). This is handy in case a reference is returned as well, since it allows the reference to be placed after the punctuation mark as prescribed by Wikipedia's manual of style. The default value is a comma (,) and can be overridden with the sep%s flag (see below).

Optional parameters can be given by encapsulating them between square brackets: [...]. All content between the square brackets is only displayed if a value for each optional parameter that has been defined between the same brackets has been found. Optional content can also be nested.

To use two opening square brackets that directly follow each other (i.e. [[), use {{!((}}(?).

At least one parameter must be given that is not optional, while the %s parameter must always be defined as optional.

To get a literal [, ], % or \, escape the character by placing a backslash \ directly in front of it (e.g. \%). See also the description directly above this table for more.

%q[%s][%r] if the property/properties command was not given and the qualifier/qualifiers command was given
%r if only the reference/references command was given
%p[ <span style="font-size:85%">(%q)</span>][%s][%r] if the property/properties command was given and the qualifier/qualifiers command was given
%a[%s] if the alias/aliases command was given
%b[%s] if the badge/badges command was given
sep= Sablon:Dfn default The fixed separator between each pair of claims.
Sablon:Dfn if only the reference/references command was given without the raw flag
sep%s= , default The movable separator between each pair of claims. This will be the value of the %s parameter applied to all claims except for the last in the list.
; if the property/properties command was not given and the qualifier/qualifiers command was given
sep%q1=, sep%q2=, sep%q3=, ... Sablon:Dfn default The separator between each pair of qualifiers of a single claim. These are the value separators for the %q1, %q2, %q3, ... parameters.

If only one qualifier/qualifiers command was given, then the sep%q1 flag is equivalent to sep%q.

sep%q= Sablon:Dfn if exactly one qualifier/qualifiers command was given The separator between each set of qualifiers of a single claim. This is the value separator for the %q parameter.

If only one qualifier/qualifiers command was given, then this flag is equivalent to sep%q1.

Sablon:Dfn if more than one qualifier/qualifiers command was given
sep%r= Sablon:Dfn default The separator between each pair of references of a single claim. This is the value separator for the %r parameter.
Sablon:Dfn if the raw flag was given for the reference/references command
punc= Sablon:Dfn default A punctuation mark placed at the end of the output. This will be placed on the %s parameter applied to the last claim in the list.

This allows any references to be placed after the punctuation mark when the output is used as part of a sentence.

Examples[szerkesztés]

Parameters and output types Example Description
Q55 = "", P395 = "(wd)"

[string]

Sablon:Tnull

Gets a literal string value.
P395 = "(wd)"

[string]

Sablon:Tnull

If the modul is transcluded on the (wd) page (which is linked to Q55), then the Q55 can be omitted.
Q55 = "", P395 = ""

[string]

Sablon:Tnull

(wd)
An entity-ID can also be given using the eid= argument.
Q55 = "", P395 = "(wd)"

[string]

Sablon:Tnull

Sablon:Module other
Adds a clickable icon that may be used to edit the returned value on Wikidata.
Q55 = "", P395 = "(wd)"

[string]

Sablon:Tnull

Sablon:Module other
Places the edit icon at the end of the line.
Q55 = "", P1082 = "(wd)"

[quantity]

Sablon:Tnull

Sablon:Module other
Gets a single property value from claims with a 'normal' rank or higher.
Q55 = "", P1082 = "(wd)"

[quantity]

Sablon:Tnull

Sablon:Module other
Gets multiple property values from claims with a 'normal' rank or higher.
Q55 = "", P1082 = "(wd)", P585 = "(wd)"

[quantity], [time]

Sablon:Tnull

Sablon:Module other
Gets a single qualifier value for each claim, additional to the property value.
Q55 = "", P1082 = "(wd)", P585 = "(wd)"

[quantity], [time], [reference]

Sablon:Tnull

Sablon:Module other
Gets references for each claim.
Q55 = "", P1082 = "(wd)"

[quantity], [reference]

A total of Sablon:Tnull people live in the Netherlands.

A total of Sablon:Module other people live in the Netherlands.
Gets a property with its references.
Q55 = "", P1082 = "(wd)"

[quantity], [reference]

The Netherlands has a population of Sablon:Tnull

The Netherlands has a population of Sablon:Module other
Adds a punctuation mark at the end of the output, in front of the references.
Q55 = "", P1082 = "(wd)", P585 = "(wd)"

[quantity], [time], [reference]

<ul>Sablon:Tlf</ul>

Returns the output in a custom format.
Q55 = "", P1082 = "(wd)", P585 = "(wd)"

[time]

Sablon:Tnull

Sablon:Module other
Gets a single qualifier per claim, by default for multiple matching claims.
Q55 = "", P1082 = "(wd)", P585 = "(wd)"

[time]

Sablon:Tnull

Sablon:Module other
To get a single qualifier for only a single claim, give the single flag too so that only a single claim will be accessed.
Q55 = "", P1082 = "(wd)", P585 = "(wd)"

[time]

Sablon:Tnull

Sablon:Module other
Gets a qualifier from claims for which the (raw) property value matches a given literal value.
Q55 = "", P1082 = "(wd)", P585 = "(wd)"

[time]

Sablon:Tnull

Sablon:Module other
Gets dates in month-day-year order.
Q55 = "", P1082 = "(wd)", P585 = "(wd)"

[time]

Sablon:Tnull

Sablon:Module other
Gets a raw date value.
Q55 = "", P1082 = "(wd)"

[reference]

Sablon:Tnull

Sablon:Module other
Gets the references from a particular claim.
Q55 = "", P1082 = "(wd)"

[reference]

Sablon:Tnull

Sablon:Module other
Gets references from a particular claim in their raw form.
Q55 = "", P1081 = "(wd)"

[quantity], [reference]

Sablon:Tnull

Sablon:Module other
Gets properties from each claim with any references they have.
Q55 = "", P1081 = "(wd)"

[quantity], [reference]

Sablon:Tnull

Sablon:Module other
Only gets properties from claims that have at least one reference.
Q55 = "", P2855 = "(wd)", P518 = "(wd)"

[entity label]

Sablon:Tnull

Sablon:Module other
Gets a single qualifier value (for each matching claim).
Q55 = "", P2855 = "(wd)", P518 = "(wd)"

[entity label]

Sablon:Tnull

Sablon:Module other
Gets multiple qualifier values (for each matching claim).
Q55 = "", P2855 = "(wd)", P518 = "(wd)"

[quantity], [entity label]

Sablon:Tnull

Sablon:Module other
Gets multiple property values along with multiple qualifier values.
Q55 = "", P2855 = "(wd)", P518 = "(wd)"

[quantity], [entity label]

Sablon:Tnull

Sablon:Module other
Returns the output with custom separators.
Q55 = "", P35 = "(wd)", P580 = "(wd)", P582 = "(wd)"

[entity label], [time]

Sablon:Tnull

Sablon:Module other
Gets two different qualifier values for each claim.
Q55 = "", P35 = "(wd)", P580 = "(wd)", P582 = "(wd)"

[entity label], [time]

Sablon:Tnull

Sablon:Module other
Returns the output with a custom separator.
Q55 = "", P35 = "(wd)", P580 = "(wd)", P582 = "(wd)"

[entity label], [time]

Sablon:Tnull

Sablon:Module other
Returns the output in a custom format instead of with a custom separator.
Q55 = "", P35 = "(wd)", Q29574 = "", P580 = "(wd)", P582 = "(wd)"

[entity label], [time]

Sablon:Tnull

Sablon:Module other
Gets a property with qualifiers from claims for which the property matches a given Q-identifier, with one of the qualifier values in its raw form.
Q55 = "", P38 = "(wd)", P518 = "(wd)"

[entity label]

Sablon:Tnull

Sablon:Module other
Gets claims that are currently valid.
Q55 = "", P38 = (wd)", P518 = "(wd)"

[entity label]

Sablon:Tnull

Sablon:Module other
Gets claims with linked property values.
Q55 = "", P38 = (wd)", P518 = "(wd)"

[entity label]

Sablon:Tnull

Sablon:Module other
Gets claims with linked qualifier values.
Q55 = "", P38 = (wd)", P518 = "(wd)"

[entity label]

Sablon:Tnull

Sablon:Module other
Gets claims with linked property and qualifier values, with short property values wherever available.
Q55 = "", P38 = (wd)", Q4917 = "", P518 = "(wd)"

[entity label]

Sablon:Tnull

Sablon:Module other
Gets qualifiers from claims for which the (raw) property value matches a given Q-identifier.
Q55 = "", P38 = (wd)", P518 = "(wd)", Q27561 = ""

[entity label]

Sablon:Tnull

Sablon:Module other
Gets properties from claims for which a (raw) qualifier value matches a given Q-identifier.
Q55 = "", P38 = (wd)"

[entity label]

Sablon:Tnull

Sablon:Module other
Gets claims that were valid in the past.
Q55 = "", P38 = (wd)"

[entity label]

Sablon:Tnull

Sablon:Module other
Gets raw property values.
Q55 = "", P38 = (wd)"

[entity label]

Sablon:Tnull

Sablon:Module other
Gets raw property values that are linked to Wikidata.
Q55 = "", P1549 = "(wd)"

[monolingual text]

Sablon:Tnull

Sablon:Module other
Gets a monolingual text value in the current wiki's language.
Q55 = "", P1549 = "(wd)", P407 = "(wd)", Q36846 = ""

[monolingual text]

Sablon:Tnull

Sablon:Module other
Gets a monolingual text value in any available language.
Q55 = "", P2884 = "(wd)"

[quantity]

Sablon:Tnull

Sablon:Module other
Gets a quantity value with its associated unit of measurement.
Q55 = "", P2884 = "(wd)"

[quantity]

Sablon:Tnull

Sablon:Module other
Gets a quantity value with a linked unit of measurement.
Q55 = "", P2884 = "(wd)"

[quantity]

Sablon:Tnull

Sablon:Module other
Gets a raw quantity value.
Q55 = "", P2884 = "(wd)"

[quantity]

Sablon:Tnull

Sablon:Module other
Gets only the unit of measurement.
Q55 = "", P2884 = "(wd)"

[quantity]

Sablon:Tnull

Sablon:Module other
Gets the raw unit of measurement.
Q55 = "", P625 = "(wd)"

[globe coordinate]

Sablon:Tnull

Sablon:Module other
Gets a globe coordinate value.
Q55 = "", P625 = "(wd)"

[globe coordinate]

Sablon:Tnull

Sablon:Module other
Gets a linked globe coordinate value.
Q55 = "", P625 = "(wd)"

[globe coordinate]

Sablon:Tnull

Sablon:Module other
Gets a raw globe coordinate value.
Q55 = "", P625 = "(wd)"

[globe coordinate]

Sablon:Tnull

Sablon:Module other
A property alias can be used instead of the P-identifier.
Q55 = "", P41 = "(wd)"

[commons media]

Sablon:Tnull

Sablon:Module other
Gets a media file name and links to it on Commons.
Q55 = "", P41 = "(wd)"

[commons media]

Sablon:Tnull

Sablon:Module other
A Commons media file can be included on the page as-is by omitting the linked and raw flags, but by using the raw flag it can be freely formatted.
Q915684 = "", P2534 = "(wd)"

[math]

Sablon:Tnull

Sablon:Module other
Gets a mathematical expression.
Q6256 = "", P3896 = "(wd)"

[geographic shape]

Sablon:Tnull

Sablon:Module other
Gets a geographic shape data file name and links to it on Commons.
Q4917 = ""

[entity label]

Sablon:Tnull

Sablon:Module other
Gets an item's label.
Q4917 = ""

[entity label]

Sablon:Tnull

Sablon:Module other
Gets an item's short and linked label.
P38 = (wd)"

[entity label]

Sablon:Tnull

Sablon:Module other
Gets a property's label.
P38 = (wd)"

[entity label]

Sablon:Tnull

Sablon:Module other
Gets a property's label that is linked to Wikidata.
Q776 = ""

[entity label]

Sablon:Tnull

Sablon:Module other
Gets an item's label.
Q776 = ""

[entity label]

Sablon:Tnull

Sablon:Module other
Gets an item's linked label.


[entity label]

Sablon:Tnull

Sablon:Module other
If the modul is transcluded on the Sablon:Module other page (which is linked to Q776), then the Q776 can be omitted.


[entity label]

Sablon:Tnull

Sablon:Module other
If just the label command with the raw flag is given, then the Q-identifier of the item connected to the current page is returned.
Q776 = ""

[page title]

Sablon:Tnull

Sablon:Module other
Gets the title of the page on the current wiki that is linked to the given item.
Q776 = ""

[page title]

Sablon:Tnull

Sablon:Module other
Gets the linked title of the page on the current wiki that is linked to the given item.


[page title]

Sablon:Tnull

Sablon:Module other
If the modul is transcluded on the Sablon:Module other page (which is linked to Q776), then the Q776 can be omitted.
Q55 = ""

[entity alias]

Sablon:Tnull

Sablon:Module other
Gets one of an item's aliases.
Q55 = ""

[entity alias]

Sablon:Tnull

Sablon:Module other
Gets all of an item's aliases.
Q55 = ""

[entity alias]

Sablon:Tnull

Sablon:Module other
Gets a linked alias from an item.


[entity alias]

Sablon:Tnull

Sablon:Module other
If the modul is transcluded on the Sablon:Module other page (which is linked to Q55), then the Q55 can be omitted.
Q2 = ""

[page badge]

Sablon:Tnull

Sablon:Module other
Gets the badges for the page on the current wiki that is linked to the given item.
Q2 = ""

[page badge]

Sablon:Tnull

Sablon:Module other
Gets the raw badges for the page on the current wiki that is linked to the given item.


[page badge]

Sablon:Tnull

Sablon:Module other
If the modul is transcluded on the Sablon:Module other page (which is linked to Q2), then the Q2 can be omitted.

Example references[szerkesztés]

See also[szerkesztés]

Sablon:Module other